|Home||» Products||» Regenerative Thermal Oxidizer||» Regenerative Thermal Oxidizer|
Designed with homogeneous ceramic bed, the offered Regenerative Thermal Oxidizer (RTO) has gained wide demands in various processing industries. The provided oxidizer is used to eliminate the air pollutants from the process steams for ensuring minimal discharge of pollutants in air. This oxidizer is manufactured in tune with international standards using utmost quality basic materials with the utilization of advanced engineering techniques. To suit the specific demands of clients, we offer this Regenerative Thermal Oxidizer (RTO) in several technical specifications within budgeted prices.
Regenerative Thermal Oxidation (RTO), also called Heat Recovery Equipment.
Primarily used for collecting polluted gases produced in varied industrial applications including Printing, Coating, Plastic & Rubber processing, and electronic industry.
RTO is preferred for receiving heat of waste gases emanated from Coaters and releasing the cleaned gases to the environment
Ensuring the less consumption of energy, enhancement of efficiency, decrease in emission and protection of environment.
RTO equipment receives polluted gases and incinerates or oxidates contaminants encompassing volatile organic compounds like acetone, butanone, cyclohexanone, ethyl acetate, methanol, xylene, etc.
Assuring of higher recycling rate: the polluted gas recycling rate can go up to 98%,
The heat energy after incineration can be re-used in different chambers like horizontal soaking line, vertical soaking line and paint drying room.
No consumption of energy: when the density of treated gas gets finished at 450 PPM and the treating speed is ensured above 25M/min, it does not require additional materials
Environment Security: Disposition rate of the exhausted gas is desirable, purification process assures 99% of accuracy, completely conforming to the national environment standard.
Smooth Operation: provided with PLC human-computer interface. It requires no operator to manage after it works for four hours.
Proper Safety: Fire & Explosion Resistant, multi-layer of safety guard.
Energy Consumption Comparison: ( There are four coaters with one set of TOHR-25000.)
Consumption of Energy without TOHR(electrical heating for the ovens):
Consumption of Electricity marks per hour for an oven (four coaters): 1,200 kw
Consumption of Electricity marks per day for an oven (twenty-four-hours/day): 28,800kw
Consumption of Electricity marks per year for an oven (threee hundred days/year): 8,640,000kw
The cost counts the electrical consumption in a year(RMB 0.80 per/kwh): RMB 6912000.00
Consumption of Energy marks with TOHR(electrical heating for an oven is replaced by heat exchange of the VOC waste gas):
Consumption of Electricity for heating of an oven : 0kW
Consumption OF Fuel oil marks for TOHR start-up : less than RMB 600000.00 in a year
Calculation has been made in line with varied operation frequency for the coaters, energy saving can be calculated around three to six million RMB every year. (The benefits significantly go up.)
|Disposal of Waste Gas||Thermal efficiency||VOC Purification||Temperature of Combustion Chamber||Operation Mode||Safety Mode|
|25,000 m3/h||95%||97%||800 centigrade||Continuous poeration||Automatic Alarm |
|Shape of hole||Size |
|Hole size |
|Wall thickness |
|Air flow||5000m3/hr ~200,000m3/hr|
|Type||one chamber, two chamber, three chamber, five chamber, rotary|
|VOC removal rate||99%|
Packaging & Delivery
EASON INDUSTRIAL ENGINEERING CO. LTD. All Rights Reserved.